|
Sapphire Scientific Stryker Cleaning and Extraction Wand
Deep, rapid penetration of solution and high volume extraction
The Stryker Cleaning and Extraction Wand is a heavy-duty carpet wand constructed of high-grade stainless steel teamed with an innovative rotomolded handle and a unique extraction head. The handle provides a neutral, balanced grip to help reduce muscle strain and operator fatigue. In the head, an integrated glide provides deep, rapid penetration of solution and uniform application – no striping, pooling or missed spots. The wand is compatible for use with any carpet extraction machine.
|
| | |
Hydroforce WET VACUUM TOOL -AX10
Never wear out your carpet wand again. This heavy-duty stainless steel tool is designed for use on hard surfaces. Fitted with neoprene rubber blades, the wet vacuum tool will make quick work of standing water on any hard surface such as concrete. All water damage crews should have these. | | Hydroforce Crevice Tool - AW80A
Do all your edge cleaning from a standing position - fast, comfortable, effective. A must for RX-20 owners. No more bending, kneeling, or stooping to clean along the base boards or in the corners. No mess. Enclosed jet directs full force of the cleaning solution directly on the soiled carpet for great cleaning with no overspray.
|
| | |
Hydroforce Carpet Wand - AW29
1.5” 2-Jets This popular wand is now available to work with high or low pressure and high temperature. This precision, all-stainless wand has extra length which means a longer and more comfortable stroke. It handles up to 500 psi, comes with two 11002 jets and an adjustable handle.
| | Hydroforce 2" s-bEND qUAD JET Wand - AW57
4-jet design with 95015 v-jets gets the heat and impact close to the carpet. Low profile head and “S” bend design for ease of use. 2” wand connection and 1.75” wand tube for great balance and airflow. All stainless steel construction for durability, yet lightweight at just 8.5lbs. 12” wide head with splash guard, designed for maximum recovery. High pressure “K” valve model 251-30 with an easy to pull trigger.
|
| | |
Hydroforce HyDry™ Deluxe Upholstery Cleaning Tool AW50D 3-1/2” & AW51D 4-1/2”
Adjustable Vacuum Relief - Adjusting the vacuum relief will increase or decrease the amount of vacuum on the fabric and also control the amount of moisture applied to the fabric. Amazingly simple!This improved version of the former HyDry tool will revolutionize the way upholstery is cleaned! With the new internal valve, 6 feet of flexible vac and pressure hose (pressure hose runs inside of vac hose), and heavy-duty vacuum relief slide, the new HyDry ™ Deluxe is much more comfortable and effective to use.
| | Hydroforce driMASTER® Upholstery Tool - AW83
This tool is now manufactured with a Stainless Steel "bar jet" as standard equipment! This plate replaces the aluminum style, maintaining a more exact tolerance in the jet's slot, is much harder and smoother than the aluminum and of course, will last much longer.
|
| | |
Hydroforce Upholstery and Stair Tool - AW30
Low pressure stainless steel tool with valve functioning to 120 psi. 4.5” wide head, fully enclosed to eliminate splash and overspray. | | Hydroforce "Easy Reach" Upholstery and Stair Tool - AW45
3” wide stainless upholstery tool designed to reach and clean where others miss. Great for detailing cars as well as normal upholstery and stair cleaning. Easily replaceable V-jet and includes a male quick connect. Can be used with pressures up to 400 p.s.i.
|
| | |
Hydroforce HyDry - AW50A 3.5" and AW51A 4.5"
This is the original HyDry, but with improvements. For the contractor who doesn’t like the internal solution hose of the new HyDry Deluxe, this original version still has the external hose and valve. The improvements include a thumb slide vacuum relief valve, just like the Deluxe.
| | Hydroforce Swivel Long Stair Tool - AW20S
Very Comfortable. Single Jet. 32” Long . 9.5” Head. Curve Before Trigger for Increased Comfort. Built for Truckmount and Portable Use
|
| | |
Hydroforce gum BLASTER Wand
What do you hate about removing gum from carpets? Messy. Labor intensive. Time consuming. Hard on your back and knees. Now it’s truly fast and easy to remove gum with GUM BLASTER! Equipped with a 1,000 psi stainless steel valve, this stainless steel tool is designed to work with a truckmount at 300 to 400 psi that can produce at least 170ºF at the wand. The higher the heat the quicker and better the gum is removed. The Gum Blaster can remove dozens of gum pieces in just a few minutes. Note: not for use on wool. May distort pile of some carpets. Test before use. | | Hydroforce Power Jet Pressure Wash - AS58
Automatically increases the impact of your pressure by 50%. Pressure wash at 1,000 psi with the same impact and effect as if your pressure were running at 1,500 psi. The amazing effect of this assembly comes from the Power Jet’s oscillating nozzle. It delivers a round spray 15 degree pattern that’s 50% more powerful than conventional flat spray results. The assembly is rated at 2,500 psi and 202 degreesand includes a 24” insulated extension. At 1,000 psi the unit will put out two gallons per minute. |
| | |
Hydroforce Pressure Gun - AS60
1,500 psi rated gun. Insulated for use with hot solutions. 24” Straight extension (insulated!). 1506 Stainless Steel V-jet. 1/4” male Quick Connect | | Hydroforce HAND VAC TOOL - AW74
Made from polished aluminum, the hand vac tool is used for vacuuming only. Can be used in combination with a spray gun to do stairs, around toilets or to dry vacuum upholstery. 5 .5” wide, fits 1.5” vac hose.
|
| | |
Hydroforce CREVICE TOOL - AW72
This 14" metal crevice tool is
great to reach those places
where your wand won't. Fits 1/5"
vac | | |
