| | |
115 V PLUG-IN POWER SPRAYER
115 Volt (230 volt optional) • Viton ® Parts In Pump,Trig. & QC's • 50 psi (.4 gpm w/8004)(.1 gpm w/50015) • 20 Ft Cord With Ret. Clip On Plug • 2 Gallon Container (changes quickly) • Each Shipped With 2 Containers • 11 Pound Empty Weigh • 14" x 6" x 22" High
| | 12v CORDLESS SPRAYER
Charges in Truck - TC1CIG & TC2CIG Charge w/ 16' cig. lighter cord • TC1 & TC2 Charge with wiring & plug from vehicle or truckmount battery & 8 foot recharge cord • 12 Volt, 7.5 Amp Hour Battery • Viton ® Parts In Pump, Trig. & QC's • 10 Foot Coil Hose (no wind up) • 50 psi (.4 gpm w/8004)(.1gpm w/50015) • Sprays 90 Min. Per Charge (30 gal.) • 2 Gallon Container (changes quickly) • Each Shipped With 2 Containers • 15 Pounds Empty Weight • 14" x 6" x 22" High • All Truck Wiring & Connectors Included (TC1 & TC2) |
| | | |
CORDLESS SPRAYER
Charges in Shop - 115 Volt Charger On Board, Mounted On Back of SC • Charge Often, Do Not Run Down Completely, Unless You Need To • Sprays 3.5 Hours Maximum On Full Charge(60 gal.) • 50 psi (.4 gpm w/8004)(.1 gpm w/50015)
10 Foot Coil Spray Hose. (No Wind Up) • 12 Volt, 12 Amp Hour Battery Powers SC) • Viton ® Parts In Pump, Trig. & QC's • 2 Gallon Container (changes quickly) • Each Shipped With 2 Containers • 25 Pounds Empty Weight • On 2 Wheel Cart, Handle Adjusts Up And Down • 16" x 8" x 26" High With Handle Down • Great for hospitals, schools, convention centers!
| | PLUG-IN POWER SPRAYER
115 Volt (230 volt optional) • Viton ® Seals In Pump & Trigger • 50 psi - .33 gpm with 8004 V-Jet Tip • 30 Foot Cord Winds Quickly • 6 Foot Coil Hose
1 Gallon Container (changes quickly) • Each Sold With 2 Containers • 5 Pounds Empty Weight • 13" x 6.5" x 10" High • Compact, Versatile, Uniform Spray |
| | | |
5 QT. ADJUSTABLE INJECTOR SPRAYER
30 TO 1000 psi • Use with Truck Mount or Portable • Valve by DEMA ENGINEERING • Each unit sold with 2 jugs (43mm caps) • 6506 Brass T-Jet tip Adjustable has settings: 4, 8, 12, 16, 24 or 32 • Ratios may vary slightly depending viscosity & psi. | | UNSMOKE® POLY SPRAYER
The UNSMOKE® Poly Sprayer is an ideal tank sprayer for the restoration professional. The sturdy polyethylene tank can handle nearly any chemical without corrosion, leakage, or rust. The pump mechanism is equipped with solvent- resistant seals and is superior to garden-type sprayers. The specially equipped UNSMOKE® Poly Sprayer comes with both cone and fan spray nozzles. Special filter and advanced trigger assembly provide for a perfectly controlled spray pattern. Extra long wand for carpet or ceiling application. Great for pre-sprays, carpet and upholstery protectors, flame retardants, etc. Order the optional Un-Duz-It® injector adaptor kit to convert your UNSMOKE® Poly Sprayer into a precision injection system. |
| | |
High-Pressure Hydro-Force™ 250 to 1,000 psi - AS08
The amazing Hydro-Force™ connects to your pressure line and automatically draws concentrate from the 5- quart container to achieve your desired dilution ratio. Use for carpet pre-sprays, deodorizers, protectors,
dying, etc. | | Revolution® High Pressure Adjustment
Injection Sprayer - AS08R
Apply any chemical in your truck. Get ratios of 1:4 up to 1:64 with a turn of the knob. • Better Cleaning. When you come to that grimy area in front of the couch, turn the knob for higher concentrations of cleaner, turn it lower for light soils. • Save Money. Now you, the professional, decide your mix ratio on prespray; heavy for heavy soil, light for light soil. You won’t need constant high concentrations when only a small portion of the job requires it. |
| | |
Five-Quart Container With Cap - AS30
Increase your efficiency by having each chemical in its own ready-to-use jug. Attaches easily to the Hydro-Force™ sprayer. Heavy durable plastic! | | Hydro-Force™ Metering Tip Kit - - NA0816A
Now your Hydro-Force™ sprayer is more versatile than ever. You can dilute concentrated chemical automatically at any of eight standard dilution ratios. Simply insert a new color-coded metering tip to change your dilution. NOTE: The standard dilution ratio for the High-Pressure Hydro-Force is 1:8 as it comes from the factory. The Low-Pressure Hydro-Force has a standard dilution ratio of 1:4. |
| | |
| Wall-mount Holder for the Hydro-Force™ Injection Sprayers - AC191 | | Floor-mount Holder for the Hydro-Force™ Injection Sprayers - AC192 |
| | |
TWBS 2-GALLON - AS202
Heavy-duty chemical-resistant hose • 18” brass extension • Solid brass trigger assembly • The perfect sprayer for small to medium jobs • High volume easy pump • Tough • Long lasting | | 3-Gallon Commercial Sprayer - AS14
Chemical resistant • 18” poly extension • Fan Pattern Spray jet • Wide funnel top • Excellent for acid chemicals |
| | |
48-oz. Hand Sprayer AS01
Chemical-resistant Nitrile gaskets • Adjustable Cone Spray Pattern | | 2-Quart Pump Sprayer - AS05
Proven the most durable hand sprayer built • For heavy-duty, continuous use • Wide mouth - easy filling • Rebuildable • Chemical-resistant viton throughout • Will outlast most other sprayers 4 to 1 • Comfortable grip & thumb trigger • Durable polyethylene |
| | |
SprayMaster Hand sprayer - AS04
5-year manufacturer’s guarantee • High volume output • Chemical resistant • 32 oz. calibrated | | Trigger Sprayer (Head Only) - AS24A
Anti-back-off locking mechanism when used with special 32 oz. bottle (AS29A) • High output on mist setting • Quick priming • Chemical resistant |
| | |
Trigger Sprayer (Bottle Only) - AS29A
Anti-back-off locking mechanism when used with special 32 oz. bottle (AS29A) • High output on mist setting • Quick priming • Chemical resistant | | 5-Gal Headpack Holder - AC198 |
| | |
| Single Holder - AC197 | | Double Holder - AC196 |
| | |
BUSY POCKETS™ - AX106A
the big pocket apron built for the professional cleaner! Carry all your spotting and upholstery cleaning accessories and chemicals! • 10” long, D-ring, adjustable strap • Outside pockets, tool holders • large velcro pocket closure for valuables • Polyester PVC reinforced, heavy-duty stitching • Fits standard 5 and 3-1/2 gallon buckets try the BUSY POCKETS™ with Stor-Ease™ bottles (pg. 45). | | Injectimate - Ac13
Wherever sub-surface injection of chemicals is needed. it will replace the carpet syringe, as it can be used in urine decontamination to inject enzymes and odor counteractants through the carpet backing. it allows you to mix your solution in a gallon container and to inject directly from the container without having to fill a syringe. every squeeze of the unit automatically injects 5 milliliters of solution. |
| | |
Carpet Syringe -AS13CN
This large capacity (60ML) syringe is perfect for injecting deodorizers deep into carpet or upholstery when neutralizing urine odors. Works well for injecting adhesive for delamination or bubbles in glue-down carpet. | | |
