| |
|
|
products
| 7000DX Flood Hog™
Double the CFM for improved water lift. We’ve added a second 3-stage vacuum motor, increasing the CFM from 115 to 230. The DX also features 144” of water lift. Both upgrades mean increased water suction for faster dry times. Dual power cords and sustained leak-free suction. Each vacuum motor is powered by one of two power cords. The 7000DX can also run on a single cord, providing 115 CFM. A check valve built into the 7000DX closes the non-running motor and prevents air leaks, maintaining full suction by the operating motor.Pumping power – The 7000DX Flood Hog™ discharges a maximum 70 GPM, more than twice that of competing models. Equipment protection, cost and time savings – Only offered by Mytee®. Our exclusive, stainless-steel mesh filter, the Lint Hog™, captures debris before it reaches the pump impeller, preventing damage, downtime and costly repairs. Mounted on top of the machine, it’s easy to access, remove and clean. These accessories, all included – An adjustable flood wand with a scalloped head for carpets and a squeegee head for hard surfaces. Two 25’ hoses, one for intake and one for discharge. Durability – With a housing made of tough roto-molded polyethylene that resists rusting and denting. | | | | Dri-Eaz Flood King DX
The Flood King DX is the heart of the ultimate extraction system of the future. It will optimize the deep extraction tools you have now as well as those yet to come. It's also the only flood pumper with Microban® product protection.
| | Dri-Eaz Rover HVE
Unsurpassed maneuverability and loads of special features make extraction more efficient than ever. The new Rover takes corners with ease while its patent-pending head design provides maximum extraction effectiveness on all types of carpet.
 | | Flood Pro DA
| | | | KleenRite Mega 3
Maximum Flood Extraction capability. Dual 3-stage vacuums and dual cord operation. 2 inch intake through-out and will provide maximum CFM for use with Power Carpet Extraction Units or you may choose to operate the unit with our optional Flood Wand. Automatic discharge is included. Pump-out unit lifts out for easy cleaning. Comes equipped with 25' of 2" vacuum hose. Additional vacuum hose is optional. Built Tough! Reasonably Priced! Available in 120V, and 240V.
| | U.S. Products Flood Pumper
Portable Floodwater Extractor for Restoration. Specifically designed for water restoration. Offering an incredible vacuum performance of 200 CFM, the Flood Pumper is no converted carpet cleaner, It handles the toughest water recovery problems. The Flood Pumper operates on a single power cord - a big help considering electricity is often limited in a disaster. It discharges through a standard 3/4" garden hose, so you can link several together as needed to reach the dumping destination. To ensure continued operation, it features dual vacuums and dual pumps away from the recovery tank. Plus, it is the lightest flood pumper in the industry. | | | | Hydroforce Water Claw Deluxe Small Unit
8”x 14” Extracts about 500 sq. ft. per hour Vacuum Release. Spring loaded handle automatically breaks vacuum between the carpet and tool for easier and faster flood extraction. Telescoping handle easily adjusts for different operators. Newly designed bottom plate for improved sub-surface extraction. Angled metal hose flange for greater durability accepts 1.5” or 2” hose cuffs. Heavy duty carrying pouch can be mounted on the wall of your van or shop. | | Hydroforce Water Claw Deluxe Medium Unit
10” x 17” Extracts about 800 sq. ft. per hour. Vacuum Release. Spring loaded handle automatically breaks vacuum between the carpet and tool for easier and faster flood extraction. Telescoping handle easily adjusts for different operators. Newly designed bottom plate for improved sub-surface extraction. Angled metal hose flange for greater durability accepts 1.5” or 2” hose cuffs. Heavy duty carrying pouch can be mounted on the wall of your van or shop.
| | | | Hydroforce Water Claw Deluxe Large Unit
12” x 21” Extracts about 1200 sq. ft. per hour. Vacuum Release. Spring loaded handle automatically breaks vacuum between the carpet and tool for easier and faster flood extraction. Telescoping handle easily adjusts for different operators. Newly designed bottom plate for improved sub-surface extraction. Angled metal hose flange for greater durability accepts 1.5” or 2” hose cuffs. Heavy duty carrying pouch can be mounted on the wall of your van or shop. | | Hydroforce Water Claw Spot Lifter
If the problem is in the carpet backing or pad, the solution is Water Claw Sub-Surface Spot Lifter. Flush out urine contamination, soda pop, oils, soap residues, food spills, etc. completely. Use with a truckmount, portable, or mini-extractor. Accepts 1.5” or 2” hose cuffs. | | | | Phoenix Hydro-X Xtreme Xtractor
The Phoenix Hydro-X Xtractor is the most effective and efficient extraction tool on the market today. The Hydro-X Xtractor’s patented Suction Roller provides both suction and compression—forcing water to the surface then sucking the water away, not allowing the water to be reabsorbed back into the carpet and pad. No other extractor today can pull as much water from the carpet and pad as the Hydro-X Xtractor. The Hydro-X Xtractor is steerable and self-propelled with variable speeds. One restoration technician can operate the unit and dry a 1200 sq. ft. structure with carpet and pad in under 2 hours! Insurance companies recognize the Hydro-X as the best tool on the market and allow for "special extraction tool" rates, sometimes up to three times higher rates per sq. ft. than regular extraction tools. The Society for Cleaning Restoration Technicians, formerly ISCT, performed a market study of extraction devices at Shaw Industries. The results from that testing can be seen in the published report from www.isct.com. In that independent study of restoration professionals, the Hydro-X Xtractor with the Hydro-X Vac Pac pulled more water out of the carpet and pad than any other product on the market today, in one case pulling 40 gallons (or 320 pints) more water out of the structure than the next best tool. Industry experts all say its easier to extract water out of a structure than it is through dehumidification and air movement. If you want to cut a DAY(S) off of your drying process, a Hydro-X Xtractor is a necessity. The Hydro-X Xtreme Xtractor tool can be connected with the Hydro-X Vacuum Pac, other portable extractors or truckmounts. However, the SCRT W.E.T. Study showed best performance is when combined with the Hydro-X Vacuum Pac. | | Phoenix Hydro-X Vacuum Pac
The Phoenix Hydro-X Vacuum Pac outperforms the competition by its ability to apply all of its suction power at the source, pulling more water than any other restoration extraction tool on the market today. The Vacuum Pac, with it's patented, portable design and high-end technology, has two powerful vacuum motors that can generate maximum suction. And because it is portable, the Vacuum Pac can be handcarried anywhere in a structure. Truckmount units must stay outside the structure, and every foot of hose deducts 1 cfm of vacuum power. When compared to truckmount units, the Vac Pac can apply all of its suction power right at the source of the water, losing no cfm due to 24, 50 or 100 ft. of hose. The Society for Cleaning Restoration Technicians (SCRT), formerly ISCT, performed a market study of extraction devices at Shaw Industries. The results from that testing can be seen in the published report from www.isct.com. In that independent study by restoration professionals, the Hydro-X Xtractor with Hydro-X Vac Pac pulled more water out of the carpet and pad than any other product on the market today, in one case pulling over 40 gallons or 320 pints more water out of the structure than the next best tool. How much longer would it have taken to dehumidify 40 gallons (320 pints) of water if the restorer had not used the Hydro-X? This study looked at using truckmounts with the different extraction tools. In every case, the Hydro-X Vacuum Pac extracted more water with the different extraction tools than the truckmount with the same or similar tools. The Vacuum Pac can be run separate from the Hydro-X Xtreme Xtractor and can run with standard wands, water claws, and any other extraction tool allowing for a 2 in. connector. The patented Hydro-X Vacuum Pac was designed to provide suction power superior to any other portable or truckmount unit on the market today. Any standard extraction tool, from a wand to a water claw, to the Hydro-X Xtreme Xtractor, can be combined with the Vacuum Pac allowing for extraction on hard surfaced floors and hard to reach areas for the Xtreme Xtractor.
| | Heavy Duty Construction extraction only wand
(glide optional) |
|
|
|
