IAQ 9000 - Mold Resistant Masonry Waterproofer
IAQ 9000 - Mold Resistant Masonry Waterproofer
  • Model: 8395
  • Shipping Weight: 50lbs
  • 100 Units in Stock
  • Manufactured by: Fiberlock

Call for Price

Details: IAQ 9000's penetrating formula binds itself deep inside masonry forming a water tight barrier.

Fiberlock IAQ 9000 is a mold resistant masonry waterproofer perfect for basement walls or other below grade vertical surfaces.

IAQ 9000 is a low-odor, waterproofing coating that is specially formulated to stop water from penetrating through a variety of interior and exterior surfaces including above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, and foundations. This latex based formula stops 10psi of water pressure (greater than a wall of water 22 feet high) and reduces radon gas penetration. IAQ 9000 contains a fungistatic agent to resist mold growth on the dry coating surface. This fast-drying formula may be applied easily with a brush and/or roller on dry surfaces and cleans up easily with soap and water.

*Resists mold growth on the coating surface.

Product Testing
Fire Rating
ASTM E84 Class A
Performance Testing
Fed. Spec. TT-P-1411-A

Fed. Spec. TT-C-555B


ASTM D-5590
Water Pressure Retention
20 lbs per inch2
Water Vapor Permeance
4.08 perms

Product Specifications
Solids by Weight ± 2%
Solids by Volume ± 2%
Viscosity at 70° F
125-135 Kreb Units
Flash Point:
Shelf Life
36 Months Min.
(Original Sealed Container)
Calculated VOC:
<100 grams/liter
Smooth Surfaces:
100-125 ft2/gal
Porous Surfaces:
75-100 ft2/gal

Drying Times (@ 70-77° F, 50% R.H)
To Touch:
1 hour
To Recoat:
3 Hours
Minimum Application Temp:
50°F (10° C)
Package Sizes
5 Gallon
Weight Per Gallon
10 lbs/gal
Part Numbers
5 Gallon

Current Reviews: 0

Restoration Banner


Have you seen ...
Course Banner